EZ RIDER - SHIELD INNOVATIONS [Red]
EZ RIDER - SHIELD INNOVATIONS [Red]
EZRide+ Wheelchair Aid
Customize your EZ Ride+ with accessories to help connect to nearly any style wheelchair.
Lightweight:
- Weighs only 30 lbs
- Folds and stores easily
- Solid State Tires means no flats
Rechargeable:
- Lithium Ion Battery
- 12-15 miles on a single charge
- Uses Standard Outlets
Nimble:
- 360 degree turning
- Forward and Revers
- Customize Hand Controls
Powerful:
- Riders up to 300 lbs
- 96W Motor
- Horn & Headlight
Cruise:
- Built-in cruise control on Pavement
- Grass & Gravel off-road
- Un-even pavement
Connect:
- Kickstand
- EZ Hookup while sitting
- Connect and disconnect without tools
Fit:
- Most Standard Wheelchairs, 16" - 24"
- EZ Installation
- Spring-loaded tow bar
- Adapters and Extensions Available
OPTIONAL ACCESSORIES:
You may customize your EZ Ride+ with accessories designed to help connect to nearly any style wheelchair.
-
EZRide+ Accessory Pack, Custom installation for any manual wheelchair. Customize your chair with the EZRide Accessory Pack. All the extras you need to make your EZRide a perfect fit for any chair, rigid or foldable. Get all of your EZRide accessories in one convenient kit.
- The pack includes:
- Set of two Struts
- Tow Bar Extension
- Set of two Butterfly Clips
- Handle Bar Extension
- Grab Handle
- Tow Bar Extension, moves the hitch away from the chair, which is good for larger individuals and for chairs with larger foot pads. Can be configured for a 3in. or 6in. extension.
- Adjustable handle bar neck is constructed of aluminum and increases the reach of the handle bars. 4.375in extension with 180 degrees of adjustability.
-
Butterfly Clips - REQUIRED for Rigid(Non-Folding) wheelchairs. These are for lighter weight chairs, with larger diameter tubing. These clips are designed for wheelchair tubing up to 36mm (1.4in.).
-
Stainless steel EZRide+ Butterfly Tow Bar Clips. These clips are designed for wheelchair tubing up to 36mm (1.4in.). Use the Butterfly Tow Bar Clips for wheelchair models: Tilite aeroZ, Tilite ZRA, Invacare Crossfire, Quickie GT, Kushall AirPro, and Strongback models 24, 24AB, 22s, and 22sAB. If the wheelchair tubing is larger than 36mm, then the butterfly clips will not work. The Allen screws can be removed and replaced with larger M8 screws (not included) greater than 50mm (2in.) in length. This will allow the clips to work on wheelchair tubes larger than 36mm.
-
-
Struts are for Rigid Chairs which are non-foldable chairs. Typically light weight aluminum, titanium, or composite material.
-
The EZRide struts are 1"/25mm diameter tubes, 6" long, intended to be mounted on frame members for when the tow bar is too wide, even when fully collapsed. Pin stop ensures the tow bar clamps will not slide off. Can be mounted on wheel chair frames up to a diameter of 38mm/1.5" Set of Two.
-